80-Amp Pro Switch-Mode BEC Brushless ESC V2 EC5 EFLA1080B Speed Controls Aircraft

Product Description :

Key Features: Up to 80 amps continuous current with proper air flow and 100 amps burst current (15 seconds) 5V switch-mode BEC capable of 5 amps continuous current with 6 amps max burst on any recommended input voltage Drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage Programmable motor braking Safe power-arm mode prevents accidental starts Programmable low voltage cutoff with settings for 3-cell Li-Po (9.
2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage Programmable throttle input range (1.
1ms–1.
9ms or 1.
2ms–1.
8ms) Programmable soft start-up rate – .
25 second or 1 second Auto motor shut down if signal is lost or there is interference Programmable timing—5 user-selectable ranges–use with a large variety of brushless motors Two operating modes–Airplane or Heli Pre-wired connectors— EC5 on battery input and 4.
0mm female gold bullets on motor output leads NOTE: Not recommended to use with Power 60 Brushless Outrunner (EFLM4060B) Overview:When performance matters in your high-current applications, look no further than the 80-amp Pro switch-mode ESC.
This is a high-quality, efficient sensorless brushless electronic speed control with an integrated switch-mode BEC.
It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.
It is capable of up to 80 amps continuous current when using 3- to 6-series Li-Po battery packs.
You can drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage

Product Details :