75200 FOC 84V High Current Single ESC with Water Cooling Enclosure for Electric Skateboard/Scooter/Ebike Speed Controller

Product Description :

Warm tips:It is recommended to keep firmware 5.
2 from factory ship, the new firmware upgrade may damage the ESC.
Specs:Firmware: 5.
2, supports firmware upgradeVoltage: 14-84V (safe for 4-20S)Continuous current: 50V/200A; 75V/150A (Values depend on the mounting, ambient temperature and air/water circulation around the device!); Burst: 300ABEC: 5V@1ASupport Modes: DC, BLDC, FOC (sinusoidal)ERPM: 150000Communication Ports: USB, CAN, UART, SPI, IICSupported Sensors: ABI, HALL, AS5047, AS5048AInput Source Support: PPM, ADC, NRF, UARTSupported Sensorless: YesRegenerative capacity: YesProgrammable via VESC_TOOL: YesSize:130×67.
7×40.
1mm(Including alu.
case)Motor/power wire size: 8 AWGFeatures:1.
Adjustable protection against: low voltage protection, high voltage protection, over current protection, temperature abnormal protection, mosfets / motor over temperature protection.
2.
Support various control modes: Current / Duty cycle / Speed / PID control modes.
3.
Support the function of balancing car by connecting the IMU module through the IIC interface; support inertial measurement unit modules such as MPU9250, MPU9150, MPU6050, LSM6DS3, BMI160.
4.
CPU:32F405 with frequency 168MHz5.
Aluminum PCB with good heat dissipation to expand life span.
6.
Two COMM ports: UART bluetooth module, screen display or remote controller supportable.
Warm tips:Phase filering is not available for Flipsky ESC75100 and 75200!Please turn off the phase filter function and choose “false” in vesc_tool when use firmware version on or above 5.
3 (VESC_TOOL 3.
01).
Without turning off the phase filter will result in esc damage.
Please do not restore the default parameters when using the wizard interface.

Product Details :