2.4GHz Vario Receiver ELRS-R24-V with Variometer Integrated 7X PWM outputs Support Battery Voltage, Current and GPS telemetry for Gliders and Other Fixed-Wings Airplane

$20.01

About This Product :

Starting from EdgeTX 2.7.1/OpenTX 2.3.15 or ExpressLRS 2.5, Baro Alt telemetry ID is supported in CRSF protocol. You need to update Transmitter, ExpressLRS TX module and Receiver all to latest verison and update CRSF-PWM-V to V2.3.0 or newer
Specially designed for the Gliders and other fixed-wings. Small form factor, It can be installed in gliders with restricted payload bays such as DLG’s and high performance slopers. No need to install an additional altimeter/variometer also saves room and weight
The built-in barometer provides vertical speed telemetry. The variometer sounds both ascending and descending tones, so you will know whether you are in lift or sink without having to look at your transmitter.
With ExpressLRS firmware and CRSF protocol, this will also give you other telemetry data like battery voltage, current and GPS related
ExpressLRS Firmware: ESP8285, SX1281, PWM Outputs: 7 (6x with power rails, PWM8 is just a signal pad)

132 in stock

SKU: BEA-BC13L8HJ Category: Toys & Games › Remote & App Controlled Vehicles & Parts › Remote & App Controlled Vehicle Parts › Radios & Parts › Radio Receivers Tags: 7X PWM, Battery Voltage, Integrated 7X, Integrated 7X PWM, Other Fixed, Receiver ELRS, Support Battery, Support Battery Voltage, Vario Receiver, Vario Receiver ELRS, Variometer Integrated, Variometer Integrated 7X

Product Description :

ESP8285, SX1281, ExpressLRS Firmware RF Frequency: 2.
4GHz ISM (2400~2480MHz) Antenna connector: IPEX MHF-1 Telemetry power: 12dbm CRSF-PWM-V converter with barometer integrated 7x PWM outputs (6x with power rails, PWM8 is just a signal pad) PWM frequency: 50, 100, 160, 330, 400Hz configurable PWM resolution: 4x 1024 position + 3x 128 position(ExpressLRS 2.
0 Wide switch mode) 1x UART(2) for GPS 36V Max.
battery voltage sense (1K:10K voltage divider built-in) Compatible with external Current sensor (0~3.
3V) RxBt,Curr,Capa,Bat%,GPS telemetry and VSpd(Vario) Rated voltage: 3.
5~9V @5V pad, 0~36V @Vbat, 0~3.
3V @Curr Power dissipation: 50mA(binding), 90mA(wifi mode) No 5V regulator built-in, Servos must be powered via 5V pad on CRSF-PWM-V board by external 5V source.
Failsafe value configurable Firmware upgradeable Physical: PCB Size: 27x16mm, Weight: 5g w/ antenna and 2.
54 pins Packing: 1x ELRS-R24-V(includes CRSF-PWM-V and 2.
4G Receiver) 1x IPEX MHF1 Antenna 2.
54mm straight and 90° 3×6 Dupont pins Firmwares 2.
4GHz Receiver: ExpressLRS /DIY_2400_RX_ESP8285_SX1280, V2.
0 or newer CRSF-PWM-V: crsf_pwm_v2.
0 or newer

Product Details :

Detail	Value
Product Dimensions	1.42 x 0.63 x 0.4 inches
Item Weight	0.634 ounces
Country of Origin	China

Dimensions	1.42 × 0.63 × 0.4 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

2.4GHz Vario Receiver ELRS-R24-V with Variometer Integrated 7X PWM outputs Support Battery Voltage, Current and GPS telemetry for Gliders and Other Fixed-Wings Airplane

Reviews

Related products

Get Our Newsletter

Login

Register