FGR8B IPX4 2.4GHz 8CH Receiver PWM PPM i-Bus Output for AFHDS3 Transmitters RF Modules PL18 NB4 /NB4 Lite FRM302 RC Boat

Product Description :

NOTE:This is the genuine FGR8B receiver,welcome to buy, Support genuine products, we will always escort .
Product Model: FGr8B Adaptive transmitter: all transmitter supporting AFHDS3 (PL18, NB4, NB4 Lite, etc.
) Model Type: Car/Boat ect.
PWM Channels: 8 RF: 2.
4GHz 2.
4G Protocol: AFHDS 3 Antenna: Single Antenna Input Power: 3.
5-9V Data Output: PWMPPMi-bus in Temperature Range: -10℃—+60℃ Humidity Limit: 20%-95% Online Update: Yes Dimensions: 35*23.
3*13.
3mm Weight: 9.
4g Certification: CE，FCC ID:N4ZFGR8B Binding: 1.
Press and hold thereceiver BIND button [5] while powering on the receiver ,release the BIND button after receiver is powered on or powering on the receiver first, press and hold the BIND button 3 seconds , the LED [7] on the receiver will flash rapidly; 2.
Put the transmitter into bind mode; 3.
The binding process is complete when the LED on the receiver stops flashing and is on continuously.
If a transmitter that has had its radio frequency (RF Standard) set to “AFHDS3 1 way” (please refer to your transmitter user manual) enters bind mode, the receiver LED will instead flash slowly.
Exit bind mode on the transmitter and if the receiver LED stops flashing and is on continuously, the binding process is complete.
4.
Check to make sure the transmitter and receiver functions are working correctly, repeat steps 1 to 3 (binding process) if any problems arise.

Product Details :