Flysky FS-i6X 6CH RC Transmitter and Receiver FS-iA6B 2.4GHz AFHDS 2A Radio Control System for FPV Drone Multirotor Fixed Wing RC Boat

Product Description :

Ahulao Flysky FS-i6X RC Transmitter and Receiver FS-iA6B 1.
Hold down the OK key on the right of the screen for 2 seconds to access the menu.
2.
After the transmitter Settings are modified, please remember to hold the ”CANCH” KEY for 2 seconds to save.
Flysky FS-i6X is a transmitter built for fixed-wing / glider / helicopter models.
Can also support RC Quadcopter/Car/Boat,even if these icons are not in the menu.
It features the AFHDS2A and AFHDS protocol,support for up to 10 Channels through DIY upgrades, and is compatible with many ST**M FPV Drone RC Simulators via PS/2 to usb Cable.
[RC simulator software purchased separately] The FS-I6X and FS-iA6B connect so well that you do not need to make new connections when you receive them.
In normal use, there is no need to connect the ” Bind plug”.
If bonding with other Receivers, you can do the following.
1, Connect the included binding cable to the receiver”s B/VCC port.
2, Plug the DC 4V-6.
5V power supply into other ports, the positive and negative poles cannot be wrongly connected.
3, Keep pressing the “BIND KEY”, and then turn on the transmitter to enter the binding mode.
4, The transmitter will display the RX voltage, that means the binding is successful.
5, Remove binding wire, Check the operation of the servos.
If something doesn”t work as expected, start this process from the beginning.
Description: Item: FS-i6X RC Transmitter Channels: 6-10CH (Default 6ch) Model Type: Fixed-Wing/Glider/Helicopter, Can support RC quadcopter/car/boat even if these icons are not in the menu.
RF Range: 2.
408-2.
475GHz RF Power: <20dBm RF Channel: 135 Bandwidth: 500KHz 2.
4GHz System: AFHDS 2A / AFDHS Modulation Type: GFSK Low Voltage Warning: <4.
2V DSC port: PS/2 Port PPM Chargeable: No Antenna Length: 1.
02inch 26mm (Dual Antenna) Weight: 13.
83oz 392g Power: 6V DC,4 * AA battery (NOT included) Display: STNTransflective Display, LCD 128×64 Lattice, VA 73x39mm, LCD with white backlight Size: 6.
85*3.
5*7.
48inch 174*89*190mm On-line Update: Yes [Upgrade cable purchased separately] Color: Black Certificate: CE0678, FCC ID: N4ZFLYSKYI6X Joystick mode: mode 2 [ left hand throttle, push the left joystick up and down, will not automatically rebound to the center ] FS-iA6B Specifications: Item: FS-iA6B Receiver Channels: PWM 6CH/ PPM 8CH s.
bus 10CH / i.
bus 10CH (Select from transmitter menu ”SYSTEN-RX setup-Outprt mode”) 2.
4GHz System: AFHDS 2A Model Type: Fixed-Wing/Glider/Helicopter/Quadcopter/Car/Boat RF Range: 2.
4055-2.
475GHz RF Receiver Sensitivity: -105dBm Bandwidth: 500KHz Modulation Type: GFSK Power: 4.
2-8.
4V DC Antenna Length:1.
02inch 26mm (Dual Antenna).
Antenna Total length:150mm*2 Weight: 0.
53oz 14.
9g Size: 1.
85*1.
03*0.
59inch 47*26.
2*14.
9mm i-BUS Port: Yes Data Acquisition Port: Yes Color: Black Certificate: CE,FCC Package Included: 1X FS-i6X Transmitter 1X FS-iA6B Receiver 1X Bind plug 1X PS/2 to usb Cable Delivery without batteries How to setup 10 Channels? Radio Transmitters FS-I6X open 10 channel method Long press the OK button for 2 seconds to enter the menu setting Select System setup to enter, Press down to the last item Aux SWitches auxiliary switch setting to enter, SwA B C D is set to select On to turn on Ch6, changed to Ch10 Long press the CANCH key to automatically save and exit

Product Details :