2kg 360 Degree Rotation Servo Programmable Geekservo Dual Output Shaft Compatible with Standard Building Blocks for Microbit Raspberry Pi MCU Control（Pack of 2pcs）

Product Description :

Description of gray servo Storage Temperature Range: -20℃～60℃ Operating Temperature Range: -10℃～50℃ Operating Voltage Range: 4.
8V～6V Operating speed (at no load): 4.
8V test 0.
14±0.
01sec/60° 6.
0V test 0.
12± 0.
01sec/60° Running current (at no load): 4.
8V test 70±20mA 6.
0V test 90±20mA Stall torque (at locked): 4.
8V test 1.
8±0.
2 kg-cm 6.
0V test 2±0.
2kg-cm Stall current (at locked): 4.
8V test 0.
8±0.
1A 6.
0V test 0.
9±0.
1A Idle current (at stopped): 4.
8V test 7±1mA 6.
0V test 7±1 mA Running life(at no load): 4.
8V test >50000 times 6.
0V test >40000 times Temperature drift(at 25°C): 4.
8V test ≤1° 6.
0V test ≤1° Limit angle: 360° Weight: 20±1g Reduction ratio: 1/300 Excessive play: ≤1° Control system: Change the pulse width Amplifier type: Digital controller Operating travel: 360°±10°(500→2500 μsec) Left&Right travelling: ≤10° Centering deviation: ≤ 2° Neutral position: 1500μsec Dead band width: ≤4μsec Rotating direction: counter Clockwise (1500→1000μsec) Pulse width range: 500→2500 μsec Maximum travel: 360°(500→2500 μsec) Shock resistance: 250±30g Description of red motor Storage Temperature Range: -20℃～60℃ Operating Temperature Range: -10℃～50℃ Operating Voltage Range: 3V Operating speed (at no load): 3V test 44±10r/min 5V test 80±10r/min Running current (at no load): 3V test 65±20mA 5V test 80±20mA Stall torque (at locked): 3V test 1.
0±0.
1 kg-cm 5V test 1.
5±0.
1 kg-cm Stall current (at locked): 3V test 0.
7±0.
2A 5V test 1.
1±0.
2A Motor speed: 0.
7±0.
2A: 3V test 12500±10% 5V test 22000±10% Motor current: 3V test ＜30mA 5V test ＜40mA Running life(at no load): 3V test >100 hours 3V test >50 hours Limit angle: 360° Weight: 18±1g Reduction ratio: 1/300 Excessive play: ≤1° Control system: Voltage control Operating travel: 360° Rotating direction: Clockwise Maximum travel: 360° Shock resistance: 200±30g

Product Details :