Metal Steel 32P Pinion Gear Sets 13T 14T 15T 16T 17T with Hex Key for 5mm Shaft RC Brushless Brush Motor RC Car Upgrade Part

Product Description :

Description:Metal steel to increased wear resistance and improve fatigue lifeNitrided to enhanced hardness corrosion resistanceTooth count: 13T 14T 15T 16T 17TTooth pitch: 32 pitch（0.
8 module is the same as 32 standard）length: 14mmFor shaft: 5mmPackage include:1 X 32p 13T pinion gear1 X 32p 14T pinion gear1 X 32p 15T pinion gear1 X 32p 16T pinion gear1 X 32p 17T pinion gear5 X Screws1 X Hex KeyMake sure you thread lock the grub screw.
They are hard to find when they fall out.
Larger gears will result in higher speeds while smaller gears provide more torque.
For quicker acceleration go for a smaller pinion gear (with fewer teeth) and larger spur gear (with more teeth).
Your car will accelerate off the mark very quickly with more torque, and you”ll also benefit from cooler running temperatures, extending the life of your motor and ESC.
How to install the pinion gear:You will probably need to loosen the motor a bit, in order to fit the pinion gear on.
Make sure you lock it in place on the flat portion of the motor shaft.
When you are tightening it back up, make sure you leave about a gap between the pinion gear and the spur gear.
That gap will be very small.
It should be about the thickness of a piece of paper.
At last, if the motor you are using has a 1/8 inch shaft with an 32p spur gear then it should fit.
.
.
It”s not about what vehicle you have necessarily.
.
.

Product Details :