JVCC DC-4109RS Double-Sided Film Tape: 1/2 in x 60 yds. (Clear)

JVCC DC-4109RS Double-Sided Film Tape is a polyester film substrate coated on both sides (AKA double-coated) with a modified solvent-free water-based acrylic adhesive (the adhesive has a one hour dwell time). This double-sided tape is perfect for the splicing of various materials such as papers, plastics, films, and foils. It can be used for mounting nameplates, keyboard assembly, and laminating dissimilar metals. DC-4109RS’s adhesion (29 ounces per inch) is comparable to a general-purpose masking tape.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product’s actual size is 12mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Silica, crystalline (airborne particles of respirable size), which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov/.

Technical Information
– Core: 3 inch diameter neutral
– Backing/Carrier: polyester (PET) film
– Adhesive: solvent-free water-based acrylic
– Release Liner: gold siliconized paper
– Thickness: 6.4 mils (carrier, adhesive, liner) 3.5 mils (carrier, adhesive) 0.5 mils (carrier)
– Adhesion: 29 ounces per inch (to stainless steel test panel)
– Tensile Strength: 7.5 pounds per inch (longitudinal)
– Service/Operating Temperature: -40F to 392F
– Elongation: 100 %

• JVCC DC-4109RS Double-Sided Film Tape is a polyester film substrate coated on both sides (AKA double-coated) with a modified solvent-free water-based acrylic adhesive (the adhesive has a one hour dwell time).
• This double-sided tape is perfect for the splicing of various materials such as papers, plastics, films, and foils.
• It can be used for mounting nameplates, keyboard assembly, and laminating dissimilar metals.
• DC-4109RS’s adhesion (29 ounces per inch) is comparable to general-purpose masking tape.
• Carrier/Backing: polyester (PET) film. Adhesive: solvent-free water-based acrylic. Release Liner: gold siliconized paper. Thickness: 6.4 mils (carrier, adhesive, liner) 3.5 mils (carrier, adhesive) 0.5 mils (carrier) 2.9 mils (liner). Adhesion: 29 ounces per inch (to stainless steel test panel). Tensile Strength: 7.5 pounds per inch (longitudinal). Service/Operating Temperature: -40F to 392F. Elongation: 100%. Core: 3-inch diameter neutral.