pH Tester With 1 Point Manual Calibration

The Milwaukee Instruments pH600 is a compact pH tester with a narrow probe for use in small samples or test tubes, and has manual two-point calibration, a single-line LCD screen, a replaceable electrode, and a low power demand. A pH meter is commonly used to measure the pH of substance such as water, food, beer, or wine in laboratory, industrial, and food applications. The single-line LCD screen of this meter shows the current measurement. The meter has manual temperature compensation and manual one-point calibration through a trimmer on the top. Three 1.5V button batteries provide approximately 700 hours of use. The meter also comes with a calibration screwdriver and instructions.

Specifications

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

A pH meter, also called a sensor or tester, is a device used to measure the acidity or alkalinity of a substance. A pH meter has either a portable or a benchtop body. Many portable meters are handheld devices. Some testers have an internal sensor, and may have a tip and body that fit inside of a container for measurement. A meter is commonly used in many different environments from laboratories to field research and manufacturing facilities. Researchers, manufacturers, and hobbyists use a pH meter in aquaculture, agricultural, wine-making, and water-testing, and for scientific applications. Some pH meters may measure additional parameters such as dissolved oxygen (DO), conductivity (also called electro-conductivity or EC), temperature, total dissolved solids (TDS), salinity, resistivity, or oxygen reduction potential (ORP)/mV.

Milwaukee Instruments manufactures electrochemical instrumentation and solutions for water analysis under the Milwaukee and Martini brands. The company, founded in 1998, is headquartered in Rocky Mount, NC.

ph600 pH tester

Protective cap

Calibration screwdriver

1.5V button batteries (3)

Instructions

pH Tester with 1 point manual calibration, ± 0.2 pH accuracy, range: 0.0 pH to 14.0 ph. Full-range pH tester. 30-day warranty, snap-over protective case, 7.01 calibration solution and calibration screwdriver are all included with unit. Range: 0.0 to 14.0 pH Resolution: 0.1 pH Accuracy: +/- 0,1 pH Calibration: manual, 1 point Battery type: 3 x 1.5V alkaline (700 hrs. of use)