JVCC E-Tape Colored Electrical Tape: 3/4 in x 66 ft. (Black)

JVCC E-Tape Colored Electrical Tape is a general purpose all-weather PVC film electrical tape with an aggressive rubber resin adhesive that comes in OSHA colors. It is a UL/CSA listed electrical tape with a 1.5 inch inner diameter core. JVCC E-Tape Electrical Tape is used for cable coding, quick identification of electrical phases, circuits, feeders, and branches. Flame retardant and cold resistant. E-Tape 3/4" inch wide rolls are individually cello-wrapped and labeled, and other widths are custom slit and bulked packed.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product’s actual size is 19mm wide. As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.

Technical Information
– Core: 1-1/2 inch diameter
– Backing/Carrier: plasticized polyvinyl chloride (PVC) film
– Adhesive: rubber resin
– Standards Met: UL/CSA listed
– Thickness: 7 mils (carrier, adhesive)
– Adhesion: 14 ounces per inch (to stainless steel test panel)
– Tensile Strength: 17 pounds per inch (longitudinal)
– Dielectric Strength: 6000 volts
– Application Temperature: 32F to 122F
– Service/Operating Temperature: 14F to 176F
– Elongation: 250 %

• JVCC E-Tape Colored Electrical Tape is a general purpose all-weather PVC film electrical tape with an aggressive rubber resin adhesive that comes in OSHA colors. It is a UL/CSA listed electrical tape with a 1.5 inch inner diameter core. JVCC E-Tape Electrical Tape is used for cable coding, quick identification of electrical phases, circuits, feeders, and branches. Flame retardant and cold resistant. E-Tape 3/4" inch wide rolls are individually cello-wrapped and labeled.
• Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
• Tape rolls are typically cut to standard tape industry metric-cut sizes – or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
• Adhesive: rubber resin. Carrier/Backing: plasticized polyvinyl chloride (PVC) film. Thickness: 7 mils (carrier, adhesive). Adhesion: 14 ounces per inch (to stainless steel test panel). Tensile Strength: 17 pounds per inch (longitudinal)
• Dielectric Breakdown: 6000 volts. Service/Operating Temperature: 14°F to 176°F. Application Temperature: 32°F to 122°F. Elongation: 250%. Standards Met: UL/CSA listed. Core: 1.5 inch diameter