ACUVUE RevitaLens Multi-Purpose Disinfecting Solution 360ml

1. Wash hands with soap & water and dry with a lint-free towel prior to handling your lenses. 2. After removing your contact lenses, clean and disinfect your lenses by placing 3 or more drops of ACUVUE™ RevitaLens Multi-Purpose Disinfecting Solution on one side of the lens surface. 3. RUB your lens gently from the center to the edges for 2-4 seconds (never rub in a circular motion, because it may tear the lens and not clean the outer edge surface). 4. Turn the lens over and repeat steps 2 and 3. 5. RINSE each side of the lens for 5 seconds with fresh ACUVUE™ RevitaLens Multi-Purpose Disinfecting Solution. Place lenses in clean lens case and fill with ACUVUE™ RevitaLens Multi-Purpose Disinfecting Solution. Close lens case tightly. Follow the complete recommended lens rubbing and rinsing times in the labeling to adequately disinfect your lenses and reduce the risk of contact lens infection. 6. SOAK – Use only fresh ACUVUE™ RevitaLens Multi-Purpose Disinfecting Solution each time you soak (store) your lenses. Allow lenses to soak for a minimum of six (6) hours for disinfection, cleaning and protein removal. EXTRA CLEANING AND COMFORT: Based on your individual tear chemistry and lens replacement schedule, your eye care professional may recommend additional care procedures. This may be particularly important if lenses are kept longer than 90 days.