Kidde Smoke Detector, Hardwired Smoke Alarm with Battery Backup, Test-Silence Button

Kidde AC Hardwired Smoke Alarm. Front-loading battery door allows you to change the battery without removing the alarm from mounting bracket.

Kidde Smoke Alarm:

• Alarm memory: Flashing green LED indicates origination alarm after condition occurs. Alarm memory also incorporates an energy management feature that "shuts down" the memory function if AC power is absent. This helps reduce battery drain, especially during the construction phase
• Provides 2 tamper-resistant options: The unit can be locked to the mounting bracket to prevent the alarm from being removed from the ceiling or wall. The battery door can also be locked to prevent battery removal. Neither option requires the use of additional components
• Battery door: Provides easy access, which reduces the installation time and battery replacement time. Unique design ensures owner is aware of battery backup, because the door will not close if there is no battery or if battery is installed incorrectly
• Smart interconnect: Interconnects up to 24 Kidde devices including smoke alarms, CO alarms and heat detector. The interconnect system should not exceed the NFPA interconnect limit of 12 smoke alarms and/or 18 initiation alarms. With 18 alarms interconnected, it is still possible to interconnect up to a total of 6 strobe and/or relay devices
• Battery pull tab: Prevents draining battery until permanent AC power is connected thus reducing callbacks for battery replacement
• Dust cover: Protects the alarm’s sensor from dust and debris during construction period
• AC quick connect: Wiring pigtail installs quickly with snap-on harness. Uses same Kidde standard quick-connect, allowing for easy upgrade