This 4-in-1 professional bullet security camera compatible with TVI, AHD, CVI and Analog DVRs. Equipped with 1/3" 1.0MP CMOS image sensor and advanced processing technology, it offers you 1080p clear and bright image.
This camera has a built-in OSD menu that can change 4 different video outputs TVI/AHD/ CVI/CVBS(960H). Please first confirm your DVR type and then adjust the camera to corresponding video output.
Operation Mode:
Switch to AHD: Press Leftward for 5 Seconds
Switch to TVI: Press Rightward for 5 Seconds
Switch to CVBS: Press Upward for 5 Seconds
Switch to CVI: Press Downward for 5 Seconds
Specification
Image Sensor: 1/3〞CMOS, CMOS with IR-Cut
Active Pixels: 1920(H)×1080(V)
Resolution: 1080P
Singal mode: TVI / AHD / CVI / CVBS 960H
Lens: 3.6mm
IR LEDs Amount: 24pcs, 5mm LEDs
IR Distance: up to 65ft (20m)
Power Supply: 12V 1A
Please noted: It only includes the camera, no power supply or video cord.
Troubleshooting
Q: Video Loss appears where the image from my camera should be displaying on my DVR?
A: 1.Check the extension cable (power and video) is securely connected to the camera.
2.Check the video output from the camera is securely connected to a video input channel on the DVR.
3.Check the power from the camera is securely connected to a power supply.
4. The camera mode do not match your DVR.there is 2 ways to setup .
(1) Press OSD Joystick “DOWN” 5 seconds,if still no picture come, try to press “LEFT” “RIGHT””UP” for 5 second, till the signal matching your DVR.
(2) Make sure the signal of your DVR, Use OSD Joystick to change the mode of the camera according to your DVRs video Mode.
Reviews
There are no reviews yet.