Adhesive Guru Silicone Mold Release Spray for Epoxy Resin (2 x 13.5 fl oz) Aerosol Release Agent and Silicone Lubricant (2 Pack)

Perfect For Many Projects, High Silicone Content & Specially Formulated Adhesive Guru Silicone Mold Release Spray is an outstanding release agent for making general purpose molds and castings. Epoxy resin, RTV silicones and rubber molds will be easily released with this product. Application; First of all, all grease, oil and dirt residues must be completely cleaned from the surface. The effectiveness of the release agent is inhibited especially by oil and grease. Shake the can thoroughly with release spray after proper cleaning. Then apply the release spray to the mold by spraying it as finely as possible. Be sure to cover all mold angles and maintain a distance of 8 to 12 inches from the mold while spraying. Wait two or three minutes and it’s ready! Wide Variety of Usage Areas Adhesive Guru mold release spray is an excellent choice for almost any project that involves molding material. This release spray can be used in a wide usage area in DIY projects or handmade accessories such as wax and candle. The specialized formula ensures that your projects come out just as you want them to! Increase Lifespan of Molds Use resin mold release agent to prevent rips. Silicone molds tend to be fragile when used for molding projects. Using our mold release spray when creating projects can help to extend the life of your molds. Adhesive Guru mold release, with its high quality content, ensures a long-lasting use by preventing your products from any accidents such as tearing-adhesion during separation.

• Perfect For Many Projects – Adhesive Guru mold release spray is an excellent choice for almost any project that involves molding material. Silicone mold release spray for epoxy resin molds used for silicone molds, candle molds, wax and urethanes. This spray is easy to use, features high quality ingredients & leaves you with a great product and intact molds.
• High Silicone Content – The high level of silicone in our Adhesive Guru mold release for epoxy resin ensures that your epoxy project doesn’t stick to your silicone molds. Release will be easy thanks to our rubber mold release spray.
• Special Formula – Made just for use with silicone and rubber molds, our mold release spray is the perfect addition to your craft room or toolshed. The special formula ensures that your projects come out exactly the way you want!
• Extend the Life Of Molds – Use this mold release agent to prevent rips. Silicone molds tend to be fragile when used for molding projects. Non-stick silicone lubricant prevents sticking, is colorless and odorless. Using our Adhesive Guru silicone spray mold release when creating projects can help prolong the life of your molds by preventing sticking.
• Easy to Apply – Our aerosol spray applicator makes using the releasing agent a breeze. Simply coat the mold in our casting release spray before casting the project. After drying, the mold release allows for easy removal of the finished part from the mold.