Tenergy 5-in-1 Intelligent Cell Meter – Capacity Checker, Battery Balancer, Battery Discharger, Internal Resistance Tester, ESC Servo PPM Tester

Tenergy 5-in-1 Cell Meter has 5 main functions: capacity checker, battery balancer, battery discharger, battery internal resistance tester, and ESC/Servo PPM tester. The capacity checker quickly tells you if the battery requires a charge, or if the pack is out of balance. Using the discharge function prior to charging your battery can maximize its runtime. Battery balancer is a great tool for battery maintenance, as keeping the cell voltages balanced within a pack can optimize its performance and prolong the life of your battery. The internal resistance tester lets you know when your battery is about to go bad, and should be discarded or replaced. Last but not least, the ESC/servo testing function can supply a reliable PPM signal to test and adjust your servo motors.

• Package includes

  • 1 x 01444 Tenergy 5-in-1 Cell Meter for LiPo / LiFePO4 / Li-ion / NiCd / NiMH Battery Packs
  • 1 x User manual
• WARNING
  
  • To avoid overheating, the discharge function can only be used for less than 6 minutes each time. After that, let the unit cool down to room temperature before discharging again.
  • DO NOT leave your battery discharging with this device unattended.

• NOTE:

  • Tenergy 5-in1 Cell Meter uses the test battery as a power source (does not require outlet adapter).
  • Li-ion/LiPo/LiFePO4 hobby battery packs NEED a balance connector in order to be tested.

• • NiMH/NiCd battery packs NEED a Hitech/Futaba connector, or an adapter, in order to be tested.
  • Li-ion/LiPo/LiFePO4 battery packs without a balance connector CAN NOT be tested.

• Battery Balancer
  Optimize your battery’s performance,and extend the overall lifespan, by ensuring the individual cells are balanced.

  Battery Discharger
  Discharging your battery prior to changing can improve the runtime of your battery. Tenergy 5-in-1 Cell Meter can discharge lithium-based battery packs to an adjustable threshold, at the discharge rate of 180mA.

  Battery Internal Resistance Tester
  For lithium-based battery packs, this cell meter can display the internal resistance of each individual cell, so you can evaluate the health of your battery pack and decide when to discard or replace it.

  ESC/SERVO PPM Tester
  Supply a reliable PPM signal to test and adjust your servo motors.
  *Note: A Y-harness and 4.8V-6V NiMH battery (not included) is needed to support ESC/Servo function.

  Includes:

  • 1 x Tenergy 5-in-1 Cell Meter for LiPo / LiFePO4 / Li-ion / NiCd / NiMH Battery Packs
  • 1 x User manual