Gates 19130 Hose

2004-1995 Toyota, Tacoma, V-6 3.4 L, Heater To Pipe-1;;

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

• Has all the quality features of Gates molded coolant hose and similar to OEM specifications
• Engineered to resist electrochemical degradation – the leading cause of hose failure
• EPDM tube, synthetic fiber knit reinforcement, EPDM cover
• Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
• Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)

NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.

CAUTION: Do not use for fuel or oil transfer applications.

;;

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

• Has all the quality features of Gates molded coolant hose and similar to OEM specifications
• Engineered to resist electrochemical degradation – the leading cause of hose failure
• EPDM tube, synthetic fiber knit reinforcement, EPDM cover
• Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
• Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)

NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.

CAUTION: Do not use for fuel or oil transfer applications.

;;2004-1995 Toyota, Tacoma, V-6 3.4 L, Heater To Pipe-1;;2004-1995 Toyota, Tacoma, V-6 3.4 L, Heater To Pipe-1;;

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

• Has all the quality features of Gates molded coolant hose and similar to OEM specifications
• Engineered to resist electrochemical degradation – the leading cause of hose failure
• EPDM tube, synthetic fiber knit reinforcement, EPDM cover
• Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
• Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)

NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.

CAUTION: Do not use for fuel or oil transfer applications.

Gates Molded Heater Hose