Recessed 4" aperture ultra-shallow new construction housing for use with LEDintegrated trims. Suitable for 2×4 residential framing or shallow plenumcommercial construction, type IC rated and can be used in direct contact withinsulation. Airtight rating reduces airflow between living spaces andunconditioned areas providing additional energy savings. Use with Halo LT4,RL4, RA4, SMD4, SLD4 LED integrated trims and the ML4 LED modular recessedlighting system.
Housing
• Single wall deep drawn aluminum
housing painted matte black for a
visually dark interior
• Adjusts vertically to accommodate
1/2” to 1-1/4” thick ceilings and
locks in position with (3) setscrews
• V notches on plaster lip facilitate
use of guide strings or laser lines for
precise positioning
• Integral gasket provides for airtight
compliance
• Shipped with overspray protector
installed
• Housing can be removed from
below the ceiling for service or
splice inspection
Plaster Frame
• Compact galvanized steel plaster
frame with integral bar hanger
receivers
• Regressed screw provide positive
horizontal bar hanger locking from
below the ceiling
• Crimp points also provide for
horizontal bar hanger locking
Bar Hangers
• Captive preinstalled Got-Nail™ bar
hangers support housing at any
point along span
• Pass-N-Thru™ feature adjust from 8”
to 24” wide without removal
• Score lines allow “tool-less”
shortening for 12˝ joists
• Captive nail penetrates standard and
engineered lumber
• Safety and guidance system
prevents snagging, ensures smooth
straight nail penetration and allows
bar hangers to be easily removed
and repositioned
• Leveling flange aligns plaster frame
with structure
• Integral clip attaches directly to
tee-bar
Junction Box
• Compact galvanized steel junction
box with 15in3 internal volume
• Listed for (10) #12 AWG 90˚ C splice
conductors
• (5) ½” conduit pry-outs positioned to
allow straight conduit runs
• (3) Slide-N-Side™ non-metallic (NM)
wire traps allows wiring outside
the box
• Accepts 14-2, 14-3, 12-2, 12-3 U.S.
and 14-2, 14-3, 12-2 Canadian NM
cable
• (3) 4-port push wire nuts with clear
caps for quick and reliable mains
voltage connections
Connector
• Two-conductor wire mount
connector is rated for 120/277V
and mates with Halo LT4, RL4,
RA4, SLD, SMD and ML4 family of
LED integrated trims.
CAUTION: verify LED module input
voltage is compatible with the input
voltage of the housing. If uncertain,
consult a qualified electrician
Code Compliance
• Type IC inherently protected,
suitable for direct contact to air
permeable insulation and cULus
listed for damp locations
• Not for use in direct contact with
spray foam insulation, consult NEMA
LSD57-2013
• Wet location listed in covered
ceilings and IP66 certified with
select trims
• Airtight per ASTM-E283
• Can be used for State of California
Title 24 high efficacy luminaire
compliance
• Suitable for use in clothes closets
when installed in accordance
with the NEC 410.16 spacing
requirements
• Contains no mercury or lead and
RoHS compliant
| Dimensions | 15.15 × 11.5 × 3.95 in |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.