Minthouz LED Lights Strip, 2 x 16.4ft 5050 RGB LEDs Color Changing Strip Lights for TV Backlight, Home Decoration, Bedroom, Kitchen, Bar, Party, with IR Remote Control and DIY Color
This product uses 5050 high-brightness chops, which greatly improves the life span of the product and the brightness of the light. Through the remote control you can adjust the brightness, color, speed and blinking mode of the light. You can also create your own colors by combining RGB colors, and save them for future use.
LED strip light is designed to have a longer lifespan
The use of independent LED chips design increases the lifespan of the light from 30,000 to 50,000 hours. At the same time, even if a single lamp bead is damaged, it will not affect the overall use.
RGB LED strip light
SMD: 5050 300 LEDs
Color: RGB
Voltage: 12V
Length: 2*5m/2*16.4ft
RGB controller box
44 keys IR remote
Controlling distance: 5cm
DC:12V – 24V
12V – 24V
Input: 100-240V AC 50/60Hz
Output: DC12V
Max. Current: 2A
Note:Please point at the sensor without any obstacles.
Installation steps:
1. Connect the light strip, controlled and power supply
2. Plug it in a nearby electrical outlet
3. Use the remote control to adjust the light strip.
FQA:
How to use DIY buttons?
– Select one of the DIY buttons and press it. You can use color addition/subtraction buttons to control the ratio of red, green and blue to achieve DIY your own color. You also can use it next.
How to cut this light strip?
– You can cut the light strip according to the indicated position and use it separately.
Why can’t my remote control the light strip?
– Please confirm whether the electrical insulation film under the remote control is unplugged.
– Point the remote control at the white receiver.
In the box:
- – 44-key remote control
- – RGB three-color combined light
- – Six storable DIY buttons
- – Safe low-voltage DC 12V power design
- – Resistant to low and high temperature
Reviews
There are no reviews yet.