Uxcell 10mm 3P LED Strip Connector Solderless for WS2811 2812B 3 Conductor Multicolor Strip Light 10 Pcs

Description:
1.These connectors for RGB multi-color Non-Waterproof light strips.
2.You can attach it with your light strips directly without any tools or operations.
3.LED Light Strip Connector better than the corner connectors because you do not waste space with the wires that connect them, the two strips literally join together right at this connector.
4.Endless Possibilities. Use it on cabinets, toe-kicks, shelving or displays – in kitchens, bedrooms, living rooms or anywhere else.

Specification:
Product Name: WS2811 2812B LED Strip Connector
Material: Plastic
Type: 3P Connector
Fit for: 10mm WS2811 2812B LED Strip Connector
Size: 15 x 14.5 x 5mm / 0.59-inch x 0.57-inch x 0.2-inch (L*W*H)
Color: White
Weight: 10g
Package Content: 10 Pcs x WS2811 2812B LED Strip Connector

Installation Instructions:
1.Open the clip on the side
2.Slid the LED light strip inside the clip underneath the two contact prongs
3.Make sure the side of the strip aligns with the "+ -" polarity
4.Close the wire clip

Installation Tips:
1.MAKE SURE you put the led strip under the poles and not on top.
2.Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side.
3.Before connection, please make sure that the surface of the copper strip is clean. If there are on it, the connection effect will be seriously affected.
Handy tool for a firmly stable connection.
The plastic is thick and solid, which is hard to be broken.
Perfect for LED tape DIY project.