Nashua 2280 Multi-Purpose Duct Tape: 3/4 in. x 60 yds. (Olive Drab)

Nashua 2280 Multi-Purpose Duct Tape is a polyethylene-coated cloth tape with a natural rubber adhesive. The tape is used for temporary holding & bonding, bundling, sealing, patching, for closing & reinforcing packaging and for temporary repairs. Nashua 2280, AKA PolyNash 2280, has a high-tack adhesive which bonds well to a wide variety of smooth and rough surfaces; has a flexible PE backing which conforms well to irregular surfaces and shapes; offers a smooth, consistent unwind providing ease of use in manual applications; its easy-tear cloth provides clean, consistent tears by hand; and it resists twisting & curling to provide ease of application reducing waste. Tested in conformance with UL723. Contains no vinyl chlorides and is low VOC (Volatile Organic Compounds).

This product used to be referred to as both Polyken GP2280 and Nashua 2280 (Polyken and Nashua are both owned by Berry Plastics) and now comes in the following 11 colors: black, blue, brown, burgundy, green, olive drab, red, silver, tan, white and yellow. Made in the U.S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product’s actual size is 18mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
– Core: 3 inch diameter
– Backing/Carrier: polyethylene (PE) coated cloth
– Adhesive: natural rubber
– Thickness: 9 mils (carrier, adhesive)
– Adhesion: 70 ounces per inch (to stainless steel test panel)
– Tensile Strength: 24 pounds per inch (longitudinal)
– Service/Operating Temperature: 40F to 200F
– Elongation: 20 %
– Flame Spread Index: 5
– Smoke Development Index: 0
– VOC Content: < 3 g/L

• Nashua 2280 Multi-Purpose Duct Tape is a polyethylene-coated cloth tape with a natural rubber adhesive. The tape is used for temporary holding and bonding, bundling, sealing, patching, for closing and reinforcing packaging and for temporary repairs.
• PolyNash 2280 has a high-tack adhesive which bonds well to a wide variety of smooth and rough surfaces; has a flexible PE backing which conforms well to irregular surfaces and shapes; offers a smooth, consistent unwind providing ease of use in manual applications; its easy-tear cloth provides clean, consistent tears by hand; and it resists twisting & curling to provide ease of application reducing waste.
• This product used to be referred to as both Polyken GP2280 and Nashua 2280 (Polyken and Nashua are both owned by Berry Plastics) and now comes in the following 11 colors: black, blue, brown, burgundy, green, olive drab, red, silver, tan, white and yellow.
• Carrier/Backing: polyethylene (PE) coated cloth. Adhesive: natural rubber. Thickness: 9 mils (carrier, adhesive). Adhesion: 70 ounces per inch (to stainless steel test panel). Tensile Strength: 24 pounds per inch (longitudinal).
• Service/Operating Temperature: 40F to 200F. Elongation: 20%. Flame Spread Index: 5. Smoke Development Index: 0. VOC Content: < 3 g/L. Standards Met: UL723; can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED. Core: 3-inch diameter.