Simpson Strong-Tie SET-XP10 SETPAC-EZ Epoxy Anchoring Adhesive

• At-xp adhesive has passed the demanding adverse condition tests of ICC-ES AC308 pertaining to reduced temperature, elevated temperature and long-term creep
• Code-listed per iapmo ues ER-263
• Can be used under static and seismic loading conditions in both cracked and uncracked concrete
• Low-odor formula dispenses easily at below-freezing temperatures without the need to warm cartridge
• Cures in substrate temperatures as low as 14°F in 24 hours or less

Ideal to be used under static and seismic loading conditions in both cracked and uncracked concrete, this epoxy tie has low-odor formula dispenses easily at below-freezing temperatures excluding the need to warm cartridge. Passed the demanding adverse condition tests by ICC-ES AC308 pertaining to reduced temperature, elevated temperature and long-term creep. Cures in substrate temperatures as low as 14F in 24 hours or less. At-xp adhesive has passed the demanding adverse condition tests of ICC-ES AC308 pertaining to reduced temperature, elevated temperature and long-term creep Code-listed per iapmo ues ER-263 Can be used under static and seismic loading conditions in both cracked and uncracked concrete Low-odor formula dispenses easily at below-freezing temperatures without the need to warm cartridge Cures in substrate temperatures as low as 14F in 24 hours or less Easiest hole-cleaning method no power brushing needed When properly mixed, adhesive will be a teal color for easy identification. Uses / Applications Threaded rod anchoring into concrete Rebar doweling into concrete Suitable for horizontal, vertical and overhead applications Shelf Life Nine months from date of manufacture in unopened cartridge. Storage Conditions For best results, store between 45F90F. To store partially used cartridges, leave hardened nozzle in place. To re-use, attach new nozzle. Clean Up Uncured material wipe up with cotton cloths. If desired, approved solvents, such as ketones (mek, acetone, etc.), lacquer thinner, or adhesive remover can be used. Do not use solvents to clean adhesive from skin. Take appropriate precautions when handling flammable solvents. Solvents may damage surfaces to which they are applied. Cured material chip or grind off surface. Gel Time: Under the ASTM C 881 test method, 3.5 minutes for a 60g mass at 73F (23C).EPOXY 8.5OZ CARTRIDGE