Sliding Window Lock, 1/2 in., Diecast Construction, White, For Vinyl Windows (2-pack)

This sliding window lock is constructed of diecast and comes in a white painted finish. This lock is DESIGNED FOR USE ON HORIZONTAL VINYL SLIDING WINDOWS, yet it may also work with some vertical sliding (single hung) windows, depending upon the type of vinyl liners and balances used to construct the windows. Note: These locks will fit most all horizontal vinyl sliding windows and some vertical sliding windows, but not all of them. These locks feature an adjustable jaw that has a vise-like grip, and they are capable of opening up to 1/2 in. wide for a secure, non-marring hold on thick vinyl rails. When installing this lock, the cam style locking lever should be rotated hand-tight over the rail or vinyl edge to a sufficient torque prior to locking down the lever. Can be adjusted to fit on rail thicknesses ranging from 1/16 in. to 1/2 in. thick. Used as a secondary lock when window is shut and to secure the windows during ventilation. For a larger version of this lock (used on vinyl frame patio sliding doors) see Prime-Line part U 10547. No tools are required for installation.

• For use on horizontal sliding windows and most vertical sliding (single hung) windows, as a secondary window lock
• Used by Acme and a variety of other closet door manufacturers
• Allows the window to be opened and ventilated while remaining secured
• Diecast construction with adjustable white nylon tips and painted white