JVCC JV497 Black Masking Tape is a crepe paper masking tape with medium adhesion. Flexible paper backing that provides good adhesion and easy release from a variety of substrates. It is good for color coding, arts & crafts, marking, packaging, bundling, holding, binding, splicing, labeling, banding, decorating and identifying. JVCC JV497 is conformable to irregular surfaces, but it is not printable. Please note masking tapes including JV497 are thin and fragile so for widths wider than 2 inches please unwind slowly to prevent the tape tearing or breaking; best to apply pressure evenly across the width of the roll when unwinding.
NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product’s actual size is 48mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.
Technical Information
– Core: 3 inch diameter neutral
– Backing/Carrier: saturated crepe paper
– Adhesive: synthetic rubber resin
– Thickness: 5.7 mils (carrier, adhesive)
– Adhesion: 32 ounces per inch (to stainless steel test panel)
– Tensile Strength: 19 pounds per inch (longitudinal)
– Service/Operating Temperature: 60F to 150F
– Elongation: 7 %
- Carrier/Backing: saturated crepe paper
- Adhesive: synthetic rubber resin
- Thickness: 5.7 mils (carrier, adhesive). Elongation: 7%.
- Adhesion: 32 ounces per inch (to stainless steel test panel). Tensile Strength: 19 pounds per inch (longitudinal).
- Service/Operating Temperature: 60F to 150F
Reviews
There are no reviews yet.