Product Description
Description:
Color:Flex Shaft
Specifications:
Clamping range: 0-3mm
Length: 1060mm / 42"
Interface: M18x1.5
Suitable for M18-M19 thread
Thread Pitch: 1.5mm
Flex shaft material:rubber
Axis diameter:3.2mm
Suitable Clip Head: 8 x 0.75
★Usage:
☆Fine carving, dust removal, fine polishing, sanding, grinding, engraving, drilling, peeling, cutting
on carpentry, nuclear carving, jade, jewelry, fire glass, metal, stone, stainless steel,etc.
▲Note:
▽When the flexible shaft works, the high-speed rotation of the shaft core in the flexible shaft will cause heat.
▽The more severe the bending of the flexible shaft, the more severe the heat will be, and even the hot shaft jacket.
▼Suggestion:
▷Stop for a while every 10-15 minutes. Do not use soft shaft drive for a long time to polish the workpiece.
▷Minimize the bending degree, or try to stretch the flexible shaft when using flexible shaft, helps to extend the service life;
▷Do not overload operation, aggravate the friction heat of the soft shaft;
▷ After using for a period of time,Inject some lubricating oil along the flexible axis for lubrication and heat dissipation when necessary.
▷Do not disassemble the flexible shaft with the electric machine so frequently.
◆How to Connect the Flex Shaft and Machine:
1、Remove rotary tool collet nut, rotary top cap.
2、Slide collet nut onto shaft core and insert shaft core into collet.
3、Tighten collet nut to make sure the shaft core is tighten.
4、Screw shaft connector onto the rotary tool.
◆How to Install Bit into Flex Shaft:
1)Insert the L key included into the hole at the collet side of the shaft.
2)Unscrew the shaft collet nut.
3)Insert bit into the shaft collet.
4)Tighten shaft collet nut by L key.
Package Included:
1 x Drill Drive Shaft
1 x L Key
Onemayship Flexible Rotary Drill Tool Drive Flex Shaft Attachment 42" Extension for Dremel
Reviews
There are no reviews yet.