Intertape 591 Double Sided Flatback Paper Tape: 3/4 in x 36 yds. (Beige)

Intertape 591 Double Sided Flatback Paper Tape is a premium 7.0 mil bleached flatback paper tape coated on both sides with a high shear resistant natural rubber/resin adhesive that bonds equally as well to almost any surface. The tape comes on a white easy release crepe paper liner that allows for either machine or hand application. IPG 591 double coated tape has become a recognized standard in the manufacture, repair, and replacement of golf grips. It is also ideal for photograph mounting, carpet installation, textile manufacturing (twister room), steel-rule die (make-ready), and any application that requires two adhesive surfaces for joining. Made in the U.S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product’s actual size is 18mm x 33m. As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
– Core: 3 inch diameter
– Backing/Carrier: bleached flatback paper
– Adhesive: natural rubber/resin
– Release Liner: white crepe paper
– Thickness: 12 mils (carrier, adhesive, liner) 7 mils (carrier, adhesive) 5 mils (liner)
– Adhesion: 52 ounces per inch (to stainless steel test panel)
– Tensile Strength: 34 pounds per inch (longitudinal)
– Service/Operating Temperature: up to 200F
– Elongation: 3 %

• Intertape 591 Double Sided Flatback Paper Tape is the recognized industry standard for manufacturing, repairing and replacing golf grips. Made with 7.0 mil bleached flatback paper tape and coated on both sides with high shear resistant natural rubber and resin adhesive, it bonds well to nearly any material.
• IPG 591 double coated tape has become a recognized standard in the manufacture, repair, and replacement of golf grips. It is also ideal for photograph mounting, carpet installation, textile manufacturing (twister room), steel-rule die (make-ready), and any application that requires two adhesive surfaces for joining.
• Carrier/Backing: bleached flatback paper. Adhesive: natural rubber/resin.
• Adhesion: 52 ounces per inch (to stainless steel test panel). Tensile Strength: 34 pounds per inch (longitudinal). Thickness: 12 mils (carrier, adhesive, liner) 7 mils (carrier, adhesive) 5 mils (liner). Elongation: 3%.
• Service/Operating Temperature: up to 200F. Release Liner: white crepe paper. Core: 3-inch diameter.