WADEO Brass Rain Barrel Spigot, Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting

How to Install
Step 1 : Drill a 1/8 inch hole.
Step 2 : Drop the fitting male piece inside.
Step 3 : Pick up the fitting from outside.
Step 4 : Tighten the nut.
Step 5 : Wrap with thread tape.
Step 6 : Tighten the faucet clockwise.

• Two Installation Methods: Brass bulkhead fittings front mounting and back mounting.
• Bulkhead fittings need 1 inch diameter holes to install.Fit up to 1.3 inch thickness wall.
• Heavy Duty Solid Brass Bulkhead Fitting, 1-1/8 inch female threaded all the way, install spigot on either end. Heavy Duty 1-1/8 inch without kink quarter turn solid brass ball valve.
• Tools Needed for Installation: Electric drill, 1-1/8 inch hole saw, and pipe wrench or adjustable wrench.
• Your Good Helper: We provide a thread seal tape and two washers (8mm between inner ring and outer ring), which can help you install the rain barrel spigot conveniently and effectively prevent leakage.