ABN | Oil Change Syringe Brake Fluid Extractor Pump Automotive Oil Syringe 200cc

• SMOOTHLY TRANSFER FLUID: The ABN | 200cc Syringe for Brake Fluid Transfer Pump is a fluid evacuator that can both remove and add fluids before bleeding, fluid changes, or repairs of power steering reservoirs, brake master cylinders, transaxles, coolant reservoirs, manual transmissions, hydraulic final drives, gas tanks, power equipment oil, and more
• REMOVE 95+ PERCENT FLUID: 7-ounce (207mL) maximum fluid capacity with dually marked graduation lines from 20cc to 200cc and 0.02qt to 0.21qt measurements and included tick marks that graduate in increments of 10cc and 0.01qt for easy reference; Unlike painted scales, the markings on this oil suction pump extractor are embossed to prevent scales from wearing off over time
• EASY TO USE: Transparent oil suction gun plastic fluid syringe with flexible tube give you a clear look inside so you can gauge the progress and know when the job is done without worrying about spillage during use; This oil siphon pump is a manual pressure unit (not vacuum unit); Fill the reservoir with fresh fluid and then use the pressurized manual handle to allow the fluid to go into the master cylinder reservoir and then the fluid will run from the top to the bottom of the syringe
• ACCESS TIGHT SPOTS: Low profile to easily get in hard-to-reach spaces and awkward angles; Tubing has 10mm outside diameter (OD) and 8mm inside diameter (ID) to fit your application (not recommended for standard motorcycle bleed valves); 12.5-inch (31.8cm) flexible tube with non-drip cap; 7.75-inch x 1.3-inch (19.7cm x 3.3cm) oil removal syringe fillable portion; 11.6-inch x 1.9-inch (29.5cm x 4.8cm) syringe overall dimensions when compressed and 19-inch (48.3cm) length when fully extended
• PACKAGE CONTENTS: Oil syringe automotive package includes (1) clear automotive fluid syringe with male threaded end for tubing attachment, (1) clear tube with female threaded end for brake fluid syringe pump attachment, and (1) non-drip cap for your convenience

Say goodbye to inadequate turkey basters from the dollar store and experience the luxury of a perfect automotive syringe pump with the ABN | 200cc Power Steering Fluid Syringe for Car Oil Suction Syringe Siphon. This fluid removal syringe is a syringe pump automotive large plastic syringe with tubing that can be used as an engine oil syringe, transmission syringe, hydraulic syringe, brake bleeder syringe, power steering syringe, and more. The large oil syringe has a 7-ounce maximum fluid capacity and includes dually marked graduation measurements from 20-200 cc and 0.02-0.21 qt. The fluid syringe automotive pump is constructed from transparent plastic and is lightly lubricated for smooth operation. The tubing is also transparent and includes a cap to prevent spills.ABN | Oil Change Syringe Brake Fluid Extractor Pump Automotive Oil Syringe 200cc