Dioche Door Entry Alert,Wireless Driveway Alarm Infrared Transmitter Receiver Motion Sensor Weatherproof For Home Security System,Security Alert System

Feature:

1. Special Design: Wireless home alarm security system, unique design, the signal is sent to the receiver, it sounds like a remote .
2. Infrared Sensor: The infrared sensor detects the movement and sends a signal to the receiver. Just place the sensor at the entrance of the driveway and the receiver is at home.
3. Wireless: The motion detector is installed wirelessly, you only need to place the sensor at the entrance, and immediately remind you when someone enters your home.
4. Welcome Reminding: The motion sensor sends an audible ringtone to remind you that someone is approaching. It is also very suitable for business owners to remind customers who are out of sight to enter their store.
5. Easy to Operate: The motion sensor is simple to operate, do whatever you want, and keep a good distance from the receiver to remind you of the arrival and departure of your family.

Specification:

Package List:

1 x Infrared Transmitter

1 x Receiver

1 x Manual

2 x Bracket Accessory

1. Gently pry up the front cover of the sensor, install a 9V laminated battery, and turn on the switch on its internal circuit board.

2. Slide the battery back cover on the back of the receiver and install two AA batteries.

3. Push up the power switch on the side of the receiver to turn on the receiver switch.

4. Install the sensor on the side of the gate entrance or where you need to detect the human body passing by.

5. Adjust the volume of the receiver, turn the power switch of the receiver to the middle position for low volume, and the uppermost position for high volume.

6. Adjust the angle of the sensor to a suitable position. When the guest enters its detection range, the receiver automatically emits a sweet music ringtone and the red LED light is on.

7. Each time the sensor is turned on, the wireless doorbell welcome device needs to perform a self‑check function, about 10 seconds, and then enter the normal working state.