Ancel AS100 OBD2 Scanner Car Code Reader Auto Detector Check Engine Light Read Clear Fault Codes Smoke Emission Vehicle Information Live Data Stream Automotive OBDII Diagnostic Tool OBD scanner

Ancel AS100 OBD2 scanner helps car owner find vehicle engine fault and give repair solutions. It helps to easily determine the DTC (Diagnostic Trouble Code) from the "Check Engine Light" indicator, and turns Check Engine Light off, clears codes and resets monitors. 
The OBDII EOBD functions also includes I/M readiness, smoke emission check, engine EPC check, view freeze frame, live data stream, vehicle information. The auto code reader works on most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. 

OBD2 Automotive Scanner Functions:

1. Read Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2. Erase Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors
3. Data Stream: Reads & displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data
4. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing
5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display
6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs
7. O2 Sensor Test
8. Data Stream and Waveform Recording and Playback: can analyze the faults that only reoccur during driving and can quickly rectify car faults

Ancel AS100 Auto Code Reder Supports Cars:

American (USA) Car:
Compatible with Standard OBD2 Cars after 1996:
for Chrysler, Ford, GM, Jeep

European Car:
Compatible with Standard OBD2 Cars after 2003:
for Alfa Romeo, SAAB, Acura, Opel, Audi, Seat, Bentley, Skoda, Daewoo, Benz, Daihatsu, Land Rover, BMW, Vauxhall, Volvo, VW, Ford, Jaguar

France Car after 2006:
for Citroen, Fiat, Renault, Peugeot, Not Support for Renault Clio 2/Megane/Dacia Logan

Japanese Car
Compatible with Standard OBD2 Cars after 2005:
for Kia, Isuzu, Honda, Mitsubishi, Hyundai, Dacia, Lexus, Mazda, Nissan, Subaru, Suzuki, Toyota

Note:
Please send us email in below format: xx, 2005, 2.0cc, Diesel, we will check it for you.

Support Protocols:
1. SAE J1850 PWM(41.6Kbaud)
2. SAE J1850 VPW(10.4Kbaud)
3. ISO9141-2(5 baud init,10.4Kbaud)
4. ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5. ISO14230-4 KWP(fast init,10.4 Kbaud)
6. ISO15765-4 CAN(11bit ID,500 Kbaud)
7. ISO15765-4 CAN(29bit ID,500 Kbaud)
8. ISO15765-4 CAN(11bit ID,250 Kbaud)
9. ISO15765-4 CAN(29bit ID,250 Kbaud)

Package List:
1 * Ancel AS100 OBD2 Scanner
1 * Manual

• Ancel AS100 OBD2 scanner works with 1996 newer vehicles (OBD II/CAN), 2000 EU-Based and Asian cars.
• Utilizes standard 16-pin OBD-II connector meaning no additional connectors or cables are necessary
• View live freeze frame data
• Easily determines the cause of the Check Engine Light (MIL)
• Turns off Check Engine Light (MIL), clears codes and resets monitors
• Retrieve vehicle information (VIN, CIN, and CVN)
• Smoke emission check
• View freeze frame
• I/M Readiness