QwicKast by EnvironMolds, is a plaster and gypsum accelerator that can decrease set times in these products to almost 8-minutes A tiny amount is all that is required for great results. As an example, by adding 1.0% by weight, you will reduce setting time to around 8-minutes. Add just 0.5% and your setting time would be about 12-minutes. If you add 0.2% by weight, then set time would take about 18-minutes. When adding use, a gram scale and mix with the plaster powder. It is not effective if added to water first.
- Qwickast accelerator from EnvironMolds decreases setting times in plaster and gypsum
- A small amount is all that is required for great results.
- Adding 1.0% by weight, will reduce setting time to around 8-minutes.
- Add just 0.5% and your setting time would be about 12-minutes
- Use a gram scale and mix with the plaster powder. It is not effective if added to water first.

Reviews
There are no reviews yet.